Why use BRUTE marine oily bilge water separators ? How about reliable, rugged and simple? Easy to use and maintain – compact & low profile – easy to retrofit – no consumables. Simple Bubba-proof automated controls – Ready to install and go to work – Quality built in USA!

With USCG / ABS/ BV / CCS and Transport Canada certification to meet the latest IMO/MEPC 107(49) requirements, our standard BRUTE marine oily water separators are installed all over the world. They are known for their Heavy Duty construction and Simple and Efficient Operation.
Each unit comes built to operate for long periods of time in a harsh Industrial/Marine Environment with very little maintenance, attention or trouble. The BRUTE can be built to match any electrical requirements. Normally provided standard with a 3 phase power.

​For smaller vessels with smaller requirements, our new Mini-BRUTE oily water separator is sized and priced to fit. Taking up only 38″ x 38″ x 10″ the Mini-BRUTE meets all international standards and is USCG approved and certified to meet the tough IMO/MEPC 107 (49) requirements.

Smaller vessels : think fishing vessels / & fleets, yachts, tour boats, harbor tugs and other formerly uninspected vessels/boats who have historically NOT been mandated to have oily water separators are now being visited and looked at by the USCG. Learn More

FEATURES: USCG Approved, IMO Certified Oil Content Monitor with 18 month data logging, Flow rate up to 0.25m3/hr (1 GPM), Electric Diaphragm Pump at 45 PSI, Fine solids and Oil Removal by Simple Filtration,
Large Capacity Oil Removal Filters, Less than 5PPM Oil Discharge.

The IMO Res. MEPC.107(49) resolution regulates the design and performance of the oily water separators (OWS)and the 15 ppm Bilge Alarms for machinery space bilges of ships. Each ship must have a certified 15 ppm bilge alarm for measuring the oil content in the discharge water. The 15 ppm Bilge Alarm type BilgMon 488 is approved and certified in accordance with the latest IMO resolution MEPC.107(49) and in addition, designed to meet the particular needs from the crew when processing the bilge water.

These oil content monitors are our default monitor for our BRUTE OWS and Bilge Filter and come with a 5 year certification which means it is certified to meet IMO/MEPC 107 (49) requirements for 5 years——-as long as the seal on the unit is not broken or missing. After 5 years it has to be re-calibrated to be certified as compliant with regulations. Big trouble awaits you if your monitor is out of certification because you would then be out of compliance with IMO/MEPC 107 (49) requirements and operating illegally. While there are a few recalibration services around, doing that takes you out of operation. The solution or work-around for that is simply getting a new measuring cell and simply installing it on your oil content monitor and you are then instantly recertified for another 5 years——-as long as you don’t break the seal on the measuring cell. It’s a simple quick installation and you’re back in business and back to being certified. Contact us directly for a certified replacement measuring cell.

2.2 gpm, 5 gpm, 10 gpm, 25 gpm, & 45 gpm. Available with or without oil content monitor. Custom sizes available – to hundreds of GPM.
2.2 In stock for FAST delivery! Call (314) 579-9755

BRUTE Bilge Oily Water Separators (BBOWS) Removal Systems are industrial marine grade oil water separators that have a variety of applications. Fully US Coast Guard certified with vessels and piping and the standard oil water separator unit being constructed from carbon steel to ASME specifications and are coated with an industrial strength epoxy coating.

IMO MEPC 107(49) certified OWS require a filter, the design remains simple and media replacement is made easy. BRUTE bilge separators use an organoclay filter media which will hold up to an amazing 50% of its weight in oils! Rugged construction of the oil water separator and its lack of moving parts make maintenance minimal. Brute Marine Oily Watet Separators are quality built in the USA and shipped as complete systems— Self monitoring with OCM· Simple maintenance free design EZ install – Ready to operate · Heavy duty epoxy/Poly-u coating · High quality components · Conductivity sensor – No filters · Stainless steel centrifugal pump · Bronze & red brass piping & valves.

BRUTE Bilge Oil Water Separators (BBOWS) Removal Systems are industrial marine grade oil water separators that have a variety of applications. Fully US Coast Guard certified with vessels and piping in the standard oil water separator unit being constructed from carbon steel to ASME specifications and are coated with an industrial strength epoxy coating.

Our line of BRUTE marine Oily Water Separator is certified by the U.S. Coast Guard (USCG). These certifications include both the older IMO MEPC 60(33) certification and the new IMO MEPC 107(49) certification. Units were tested by certification labs to operate within the limits and regulations of the IMO standards. Coast Guard certification is therefore available for your unit as an option if you need it.

The IMO has established the standards that have to be met for certification. Our BRUTE units have been tested to these standards and the testing verified by the USCG for regulations 107(49).

ABS has given it’s type approval to the BRUTE Separator.

BRUTE oil water separator units are shipped complete with motor, pumps, piping and controls and are ready to be easily installed and operated without delay.

Operation of this unit is a simple process. With just a little training the system can be started & runs automatically from that point on.

These oil water separator systems are designed to be simple. No complicated piping or schemes. Reliability comes as a result of the solid construction, the lack of moving parts and the simplicity.

The BRUTE oil water separator is designed to fit on ships, platforms and other tight spaces. This unit has a small footprint making it adaptable to most situations

The standard oil water separator uses no consumables of any kind including filters. This means lower operating costs and headaches. Although the new IMO MEPC 107(49) certified unit requires a filter, the design remains simple and media replacement is made easy. The rugged construction of the oil water separator and it’s lack of moving parts make maintenance minimal.

These marine oil water separator units are designed from the bottom up to operate automatically and monitor and adjust to your conditions. Self priming systems mean hassle free operation. There is no need for these oil water separator units to be installed on a flat, level, or even immobile surface. This makes them ideal for trucks, ships and other mobile applications.

Because of the solid construction of these marine oil water separators, low maintenance requirement, and low consumables, the operating costs are incredibly low.

Each component used in the marine oil water separators has been individually selected for it’s industrial strength, strong vendor support, reliability and low maintenance requirements.

We stock various sizes of basic marine oil water separators so as to be able to respond quickly to your needs. We can often take a stocked separator and add the options you need quickly to get you up and separating. Give us a call to see what we can do for you.

Our engineering department is available for consultation regarding your custom marine oil water separator requirements. Each Specific application usually has some specific needs. Let us help you determine exactly what will work for you.